| Pages in topic: [1 2] > | Studio 2009: term recognition doesn't work right Thread poster: AZTranslations
|
|---|
Hello all.
For the last couple of days I've had the following problem with Studio 2009:
The term recognition works only selectively, i.e. if I don't check the "Show recognized terms with no available translation" in the search settings, only one (or none) of the termbases appear in the term recognition window. If I check it, all selected termbases appear - with translations btw - and the terms are also marked with the red bars in the source. However, they are not auto-completed when ... See more Hello all.
For the last couple of days I've had the following problem with Studio 2009:
The term recognition works only selectively, i.e. if I don't check the "Show recognized terms with no available translation" in the search settings, only one (or none) of the termbases appear in the term recognition window. If I check it, all selected termbases appear - with translations btw - and the terms are also marked with the red bars in the source. However, they are not auto-completed when I start typing them! I have to manually right-click on the term in the term recognition window and select "Insert term translation"!
My termbases have UK- English and US-English or both, while there is only one target language set in the project, however, THIS HAS NOT BEEN A PROBLEM PREVIOUSLY! Regardless of the language variant, all available terms were recognized and auto-completed!
I have made no changes to my system (XP), so I don't know why all of a sudden this problem appeared?!
Can anyone help me, please? I have not found anything in the forum on this...
Thank you!!!!!
Anke ▲ Collapse
| | | | Alexey Ivanov 
Russian Federation
Local time: 07:50
English to Russian
| The only solution I know is to repair Studio installation | Dec 13, 2010 |
I occasionally have the same problem. As I have established it happens with projects with MS Word files with heavy graphics. As I have found no cure to this in the SDL knowledge base, what I usually do, and it always helps, I go Start>Control Panel>Programs>SDL Studio and select "Repair" from the menu.
| | | | Jerzy Czopik
Germany
Local time: 05:50
Member (2003)
Polish to German
+ ...
| Side-by-Side tools can be the solution | Dec 13, 2010 |
Use the Activate Multiterm 2009 or Repair Multiterm 2009 tool.
These should solve your problem
| | | | AZTranslations
Germany
Local time: 05:50
German to English
+ ...
TOPIC STARTER | Now updating to SP3 | Dec 13, 2010 |
Somehow I had missed that update, so that's what I'm doing now. Hopefully that will resolve the issue....
Thanks for the help, especially Jerzy!
| | |
|
|
|
AZTranslations
Germany
Local time: 05:50
German to English
+ ...
TOPIC STARTER | Now term recognition doesn't work at all?! | Dec 14, 2010 |
Wonderful. I installed SP3, and now term recognition doesn't work at all. I can search for the terms manually and insert them, but that's not really a solution!
| | | | Jerzy Czopik
Germany
Local time: 05:50
Member (2003)
Polish to German
+ ...
I'm afraid this is not only SP3...
Could you please check in Control panel, which Java versions are installed on your system?
| | | | AZTranslations
Germany
Local time: 05:50
German to English
+ ...
TOPIC STARTER | Java version | Dec 14, 2010 |
1.6.0_22
| | | | Walter Blaser
Switzerland
Local time: 05:50
French to German
+ ...
| You also need to install Cumulative Update 8 + 9 | Dec 14, 2010 |
The initial SP3 release still contains bugs with regard to the term recognition. You should make sure you also install the Cumulative Updates that have been released shortly after SP3. You may use the Update function inbuilt in Studio and Multiterm
Walter
| | |
|
|
|
AZTranslations
Germany
Local time: 05:50
German to English
+ ...
TOPIC STARTER
It says I have the current version...
| | | | Jerzy Czopik
Germany
Local time: 05:50
Member (2003)
Polish to German
+ ...
| You MUST have Java 1.6.0_14 | Dec 14, 2010 |
That is what I know.
If you go to SDL Studio installation folder, you will find the installer for that Java release.
| | | | AZTranslations
Germany
Local time: 05:50
German to English
+ ...
TOPIC STARTER | OK, next problem | Dec 14, 2010 |
Ok, now I uninstalled SP3 again, fixed the Java problem, re-installed SP3 and the updates 1, 8 and 9.
Then I came across Article # 3420 (Repair after updates 8 and 9), but the zip file is empty?!! Does anyone have this file and could send it to me, please?
I really appreciate all the help, already given and in the future!
| | | | Jerzy Czopik
Germany
Local time: 05:50
Member (2003)
Polish to German
+ ...
| Looks like talisma is on strike today | Dec 14, 2010 |
Please try again later there - I also cannot download the ZIP.
| | |
|
|
|
AZTranslations
Germany
Local time: 05:50
German to English
+ ...
TOPIC STARTER | FInally could download it | Dec 14, 2010 |
I could finally download the patch, but it ran with errors and the problem persists, plus now I also can't add terms?!
| | | | Jerzy Czopik
Germany
Local time: 05:50
Member (2003)
Polish to German
+ ...
| What kind of error messages? | Dec 14, 2010 |
Or what problems did occur when you ran the tool?
| | | | AZTranslations
Germany
Local time: 05:50
German to English
+ ...
TOPIC STARTER | Error message | Dec 15, 2010 |
In the meantime, because SP3 is not working properly, I have uninstalled SP3 and reinstalled SP2, which then wouldn't open at all (couldn't load Editor view), so now I reinstalled SP3, but the same problems persist:
- Selective term recognition and auto-completion
- Adding and editing terms is not possible (error message: needs to install Java 5, I install it, and then nothing happens)
These are the error messages I get after running the hot fixes for SP3:
Repair f... See more In the meantime, because SP3 is not working properly, I have uninstalled SP3 and reinstalled SP2, which then wouldn't open at all (couldn't load Editor view), so now I reinstalled SP3, but the same problems persist:
- Selective term recognition and auto-completion
- Adding and editing terms is not possible (error message: needs to install Java 5, I install it, and then nothing happens)
These are the error messages I get after running the hot fixes for SP3:
Repair failed!
Problem executing command: C:\WINDOWS\system32\msiexec.exe /f {8302F817-9F82-40F2-8149-8BB50B0250F7} /l ".\MTCore_LOG.log"
Problem executing command: C:\WINDOWS\system32\msiexec.exe /f {EA7AC182-CB13-499B-A9B0-CE64D010A1B2} /l ".\MTExtract_LOG.log"
Problem executing command: C:\WINDOWS\system32\msiexec.exe /f {48401067-6865-480B-B961-24731C529FDB} /l ".\MTAdmin_LOG.log"
I'm really starting to get tired of this. I want a working, fully functional Studio, please!!!
[Bearbeitet am 2010-12-15 17:28 GMT] ▲ Collapse
| | | | | Pages in topic: [1 2] > | To report site rules violations or get help, contact a site moderator: You can also contact site staff by submitting a support request » Studio 2009: term recognition doesn't work right | CafeTran Espresso | You've never met a CAT tool this clever!
Translate faster & easier, using a sophisticated CAT tool built by a translator / developer.
Accept jobs from clients who use Trados, MemoQ, Wordfast & major CAT tools.
Download and start using CafeTran Espresso -- for free
Buy now! » |
| | Trados Studio 2022 Freelance | The leading translation software used by over 270,000 translators.
Designed with your feedback in mind, Trados Studio 2022 delivers an unrivalled, powerful desktop
and cloud solution, empowering you to work in the most efficient and cost-effective way.
More info » |
|
| | | | X Sign in to your ProZ.com account... | | | | | |
Login to reply/comment 
Translation news related to SDL Trados
